CPU cooling question

Before I get to the meat and potatoes of the question I have ill post my system specs.

Case: MasterCase Pro 5 Mid-Tower

Mobo: Asus Z170A

CPU: Intel Core i5-6600 Skylake Quad-Core 3.3 GHz

Memory: G.SKILL Ripjaws V Series 32GB (4 x 8GB) 288-Pin DDR4

PSU: [EVGA SuperNOVA 1200 watt platinum rated

Current GPU: Nividia GTX 980

HDD : WD Black 1TB Performance Desktop Hard Disk Drive

I switched the GPU to an Nividia RTX 2060 and the CPU I switched for an Intel Core i7-6700K. ATM im using a stock cooler.The temps are a bit warm for my taste. Im not wanting to do the Overclocking scenario,so I really dont need anything massive. Just enough to keep the temps down.

I have considered getting a tower cooling system. The only thing im worried about is clearance,seeing my case is only a midtower. I was wanting some advice on if a tower cooler could fit in my case, or is there another solid alternative. Thank you for any advice

give us an example of what cooler you want, it seems your computer case can take tower coolers

for example, my case is a antec p100, its about the same dimensions as yours except your case is a bit wider. I was still able to fit in a noctua nh-d15. my gpu isn’t even near the cooler and I have enough room for the ram slots.

Think you should be fine if you wanted a big cooler like the nh-d15 or even a dark pro 4.

To be on the safe side, I would suggest the nh-d15, depending on how tall your ram sticks are, you can slide one of the fans a bit upward to give more clearance to your sticks, not sure about the other coolers can do that.

I was looking at something like a Cooler Master Hyper 212 EVO. Like I mentioned I dont need anything massive ATM

Oh… Yes for sure the hyper 212 Evo can work. A mild overclock can work on the 6700k should you ever change your mind

Get the Black Edition though. Its only like 5$ more and looks much better.

Unless you’re buying in-store and they dont have it, or you dont care how it looks.

After watching some install videos,a concern came up. The clearance between the fan and the RAM. My RAM isnt exactly what you’d call low profile. That did give me room for pause. Id put some thought into Cooler Master i71C. It might not be the best but it would sure beat stock

You have lots of clearance for the 212 as you can raise the fan up if need be as well.

The case has a max cpu cooler height of 190mm and the 212 evo is 159mm but if you get the black edition it looks like you can raise the fan higher then the evo would allow.

a deepcool gammaxx 400, costs under 30 bucks and has out preformed AIO’s on 3 of my systems

in fact i have 2 ryzen builds that full load this thing keeps them 61-63C.
the $150+ AIO’s i was using would flat out under full load stress tests at around 69-71C

on the i7 (i forget honestly what it is as i never use it, my daughters pc i built 2 years ago) if i remember right temps were about the same.